Spherical Lenses

Spherical lenses can be used to focus a beam, form an image, and collimate or expand a beam of light. At CVI Laser Optics, we routinely manufacture lenses with high surface quality and accuracy, and have extensive experience in delivering high laser damage threshold optics. However, we also understand the importance of balancing cost and performance for less demanding applications that still require precision and well controlled manufacturing. That is why our products include lenses in a broad range of shapes, materials, focal lengths and diameters, with different quality levels to address the various performance requirements of our customers. We have the knowledge to understand your needs and supply the best component for your application: not over-specified, with the right quality and cost.

If you are unable to find a perfect fit within our line of standard offering, we encourage you to call us to discuss a custom solution. We have experience working with a variety of other materials using conventional, diamond turning, and molded fabrication techniques. We can manufacture a lens with the right combination of shape, radius of curvature, diameter, and tolerances to meet your exact requirements for OEM or prototype use.

High quality antireflection coatings are essential for maximum throughput and power handling, and ours are among the best. We offer a wide range of broadband, laser line, and custom coatings. To achieve highest laser damage threshold, we typically recommend V-coat antireflection coatings on laser-grade 10-5 fused silica substrates.

Capabilities

  Standard Custom Options

Types

Plano-convex, plano-concave,

biconcave, molded aspheric condenser

Biconvex, meniscus, precision aspheric lenses, best form lenses

Materials

N-BK7, UV-grade fused silica, UV-grade CaF2, N-SF11

Other optical glasses

Diameter

5 to 50.8 mm

Polished: up to 250 mm

Molded: up to 75 mm

Diamond turned: up to 250 mm

Focal length

20 mm to 5.0m, convex or concave

Up to 10.0m

Coatings

  • Narrowband V-coat AR
  • Dual wavelength (1064/532)
  • Broadband Multilayer
  • Single layer MgF2 AR
  • Other wavelengths (193-2100nm)
  • Triple-V AR coating
  • Mirror coating

Quality

Standard and laser quality

See manufacturing tolerances below

Spherical Lens Manufacturing Capabilities**

Surface Tolerances Standard Laser Quality
Surface quality (scratch - dig) 60 - 40 10 - 5*
Surface roughness (Å, RMS) 20 5
Surface Irregularity
(waves, P-V @ 633 nm)
λ/2 λ/10
Surface Power
(waves, P-V @ 633 nm)
λ/2 λ/10
Dimensional Tolerances Standard Precision
Diameter (mm) +0/-0.25 +0/-0.10
Center thickness (mm) ± 0.25 ± 0.10
Spherical radius (fringes) 5 3
Centration (edge thickness variation, mm) 0.05 0.03
Clear aperture (%) ≥85% ≥85%

 

* This is for the most well behaved materials, like fused silica and N-BK7.  Softer materials like CaF2 and N-SF11 are manufactured with 20-10 laser grade surface quality.

** Note: The general tolerance specifications above are intended to guide determination of appropriate tolerances based both on relative cost and manufacturability. Part-specific tolerances will vary depending on size, material, shape and aspect ratio. Tighter tolerances may be possible, so please contact us to discuss your custom specifications. All specifications do not need to be from a single column, though trade-offs may be required in order to meet the desired combination of cost and performance.